Fabtech 2019 Fits Chevrolet Silverado Sierra 1500 Pickup Shocks 6" System K1132

Fabtech 2019 Fits Chevrolet Silverado Sierra 1500 Pickup Shocks 6" System K1132CROSSMEMBERS1/4″ thick steel lower control arm Crossmembers are arched for maximum ground clearance. The welded box design of these Crossmembers provides additional strength to the front suspension. Retains factory alignment cams for easy adjustment. KNUCKLESFabtech’s extended length ductile iron Steering Knuckles provide zero bump steer throughout the suspension travel. This provides an enhanced driver experience compared to stock. Near stock track width keeps the tires under the fenders for a clean appearance. RODSOversized tie rods are provided to replace the stock units that are designed to handle oversized tires. SPACERSThe factory Coilovers are relocated with heavy duty lower mounts to lift the vehicle while retaining the stock ride quality. heavy duty front differential Skid Plate is constructed of 1/4″ thick steel to protect the diff from offroad obstacles. MOUNTSTriple Differential Mounts properly reposition the front diff for the precise and driveshaft angle to reduce driveline vibration at high speed. MOUNTS1/4″ thick steel drop brackets reposition the front sway bar for the increased ride height. This allows the sway bar link ends to fully cycle without binding throughout the extended travel range. SPACERSBillet spacers relocate the factory closed cell bump stops to control the travel eliminating over cycling of the suspension. BLOCKS5″ tall steel rear lift blocks replace the factory blocks for additional lift without changing the ride quality or load carrying capacity. U-BOLTSAmerican made U-Bolts designed to attach the entire rear differential to the vehicle. A critical part that demands the best quality for your vehicle. ?Extended length twin tube shocks provide a good highway ride with the ability to handle offroad use. Fabtechs Basic System features our world renowned suspension design for the Chevy/ 1500 providing excellent drive ability both on and offroad. There is zero bump steer throughout the suspension cycle that helps reduce drive fatigue while improving the overall drive ability of the vehicle.The near stock track width keeps the tires under the fenders for a clean appearance. Fabtechs proprietary steering knuckle geometry provides excellent lock to lock turning radius to maneuver in tight spots.Heavy duty 1/4? thick steel crossmembers feature style alignment cam pins that utilize the factory cams for easy adjustment. Triple front diff mounts reposition the differential for vibration free operation at high speed.The factory coilover shocks are relocated from the bottom to allow for full steer while achieving 6 of lift. Rear lift is accomplished with a 5? Block and u-bolt system.Fabtech has addressed all aspects of